ponyprog - 3.1.3+ds-2 main

PonyProg is a serial device programmer software with a user friendly
GUI framework available for Windows and Linux. It's purpose is reading
and writing every serial device. With PonyProg and SI-Prog you can
program Wafercard for SAT, eeprom within GSM, TV or CAR-RADIO.
Furthermore it can be used as a low cost starter kit for PIC and AVR.
.
PonyProg supports AVR, SPI eeprom, AVR micro, I2C bus 8bit eeprom, PIC
16 micro, PIC 12 micro, AT89S micro and SDE2506 eeprom family chips.
.
You can open any HEX, e2p, mot, csm, rom, eep, bin files and burn them
to uC or PIC. You can even backup the old program on the chip using
PonyProg. PonyProg enables the user to write, verify and erase data on
the microchip.
.
Also setting fuse bits and locks using PonyProg is possible. You can
save any HEX file to BIN file or eep file, BIN file to HEX file or MOT
file and vice versa so you can use PonyProg as converter too. PonyProg
offers serial or parallel port programming for uC's. You can even change
polarity of control lines without touching the wires using I/O port setup.
.
Using PonyProg together with generic USB2serial based on FTDI adapters will
work. There are plans on upstream to use libusb to add more USB2serial
based functionality.